Archive for February 2012

make a circle

We can make a circle in some way, either by using the standard method for determining the center and radius. AutoCAD provides three other ways to draw a circle. Draw a Circle Tangent to Other Objects Tangent point is the point at which an object without touching other objects that intersect it. To create a circle that intersect with other objects, select the object and then specify the radius of the circle. To create a circle tangent at three points To make the circle tangent at three points, set to run the object is locked (OSNAP) for Tangent and three-point method to create a circle. To draw a circle by specifying a center point and radius or diameter To draw a circle by determining the center point and radius or diameter From the Draw menu, select the Circle Center, Radius or the Center, Diameter. Determine the center point. Specify the radius or diameter.   Draw toolbar Draw menu: Circle Command line: circle Determine the center point of circle or [3P (Three Points) / 2P (Two Points) / TTR (tan tan radius)]: Specify a point or enter an option Center Point Center Point Draw a circle based on a center point and diameter or radius. Determine the radius of circle or [Diameter]: Specify a point, enter the value, enter d, or press ENTER Radius Finger Defining the radius of the circle. Enter a value, or set point. The distance between the point and center point determines the radius of the circle. Diameter Diameter Draw a circle using the center point and a certain distance to diameter. Determine the diameter of the circle Determining a point enter the value, or press ENTER 3P (Three Points) 3P (Three Points) Draw a circle based on three points on the circumference. Specify first point on the circle: Specify a point (1) Determine the point on the second circle: Specify a point (2) Determine the point on the third circle: Specify a point (3) ....................................... SOLIDWORK, UNIGRAPHICS, AUTOCAD, ILLUSTRATOR, PHOTOSHOP

Comments Off

Start making simple 3D

We'll start making this 3D with more detail and complete again with the start of creating a new part.
Click the New button on the Standard toolbar.
New SolidWorks Document dialog box will appear.
Click Part.
Click OK
Next determine the plane
Determine the plane or the area that we want to make pictures ..... top, bottom, right or left

Next we create a sketch, for now we will make the box, then
Click Rectangle on the Sketch toolbar.
The Rectangle PropertyManager open in the left window.
Move the pointer in the workspace.
Click to place the starting point of the image.
Move the mouse and see a dynamic preview to follow the pointer.
Release the mouse and click on PropertyManager to complete the rectangle.
Now add the desired dimensions.
Click Smart Dimension on the Sketch toolbar.
Select the box that we are drawing.
Notice the preview box dimensions.
Move the pointer to where we want to give dimension and click to add dimension.
In the Modify box, click on the graph area.
Click Extrude 2D sketches to create 3D blocks.
Click Sketch on the Sketch toolbar to get out of Sketch.
The settings for extrusion appeared in PropertyManager in the left pane.
In PropertyManager, under Direction 1:
Select End Condition Blind ins.
Do not forget to save

Comments Off

Make a sketch rectangle UniGRAPHICS

In making the rectangle are many steps that we can do, including making a rectangle by selecting the two diagonal corners. By using the cursor to determine the angle, this allows us to see the rectangular before it actually made. Rectangles created in the XC-YC plane, YC, ZC, or XC-ZC. The Rectangle option provides the option to make the curve and sketch steps to create a rectangle: 1. Make the first corner; using Point Constructors or enter the input coordinates. 2. Making the second corner; by pulling the cursor to the desired location and click a mouse button or enter the coordinates.
We can make the sides of rectangular horizontal or vertical grid associated with the sketch. For the rectangle side that is on a different orientation, create a line of Parallelogram. In addition, to make a rectangle: 1. Click Rectangle on the Sketch toolbar, or Tools, Sketch Entity, Rectangle. 2. Click to place the first end of the rectangle, drag, and release when the rectangle according to the size and shape.

Comments Off

Solidwork : Creating a new plane with arc or curve

The first step we have to do is click on the toolbar Plane Geometry references, or click Insert, Reference Geometry, Plane. The PropertyManager Plane will appear. In the selection, select the type of plane that we want to create and the items to make a plane: For the Normal Curve. Create a plane through point and perpendicular to the edge or curve. Select the edges or curves, and dots. Select Set the origin on the curve of a check box to the place of origin on the curve, the default is to place the origin point  
We only select the curve to create a new plane. Plane perpendicular to the end of the curve. The selected items will appear in the Reference Entities box. A preview of the new plane appears in the graph area. Click OK to create the plane. new plane appears in the graphics area and te rdaftar in FeatureManager design tree. To cancel the transaction, click cancel. To create a plane, click save in PropertyManager Plane will be displayed.

Comments Off

AutoCAD 2012

Now we will learn autocad by trying to use the latest version of AutoCAD 2012
The first step we must do in order to use AutoCAD 2012 is the software to install via CD-ROM.
If we are not used to install AutoCAD, we can ask for help from someone familiar with the computer system.
For those who want to try to install itself, steps should be taken to install AutoCAD 2012 is:
1. Run AutoCAD Installation Wizard (SETUP.EXE) from the CD or the hard drive
2. Choose the language bahasa (language) used to install and click Install Product
3. In the Select the Product to Install, checklists Autodesk Autocad 2012 and 2012 Material Library and then click Next
4. At the License Agreement, Select I Accept and click Next
5. In the User and Product Information, the contents of the required data and fill in the serial number and product key / keygen, then click Next.
6. On the Begin Installation, click Install, and when asked whether to use the default configuration / settings,
click yes. Because by default, will install AutoCad for personal computers.
7. Wait until the program finished installing AutoCad.
8. Click Finish.
AutoCAD has finished installed on the computer.
If we use the activation code crack for Autocad how to extract the crack in the CD to the AutoCad program file that is installed in C: \ Program Files \ Autodesk \ AutoCAD 2012 - Home
By default, AutoCAD put a shortcut on the desktop. We can double-click this shortcut to launch AutoCAD or it can from the start> Programs> Autodesk> AutoCAD 2012> AutoCAD 2012.
Creating a New Image
Once we install the AutoCAD program, will automatically open a new image / blank with the name Drawing1.dwg.
AutoCAD 2012 offers lots of workspace including drafting & Annotation, 3D basics, 3D modeling, Autocad Classic.
When we first opened autocad default screen will appear. If we are going to work in 2D in AutoCAD,
steps we have to do is:
1. Switching from the Workspace menu pop-up window, select the 2D Drafting & Annotation. This shows
ribbon with 2D commands.
2. Select Button Application> New. From the Select Template dialog box, select acad.dwt and
click Open. This puts you in a 2D display on and off the grid.

Comments Off

STARTING UNIGRAPHICS

Unigraphics interface using a toolbar that can be customized for each user. Various options are located below the Menu bar and a variety of cascades can accessed by selecting the appropriate icon from the toolbar. For emphasis "ease of use". Here we will start from the beginning by introducing the functions and identify locations with respect to the toolbar and icons. Session Unigraphics has "out of the, box" interface, so that Gateway applications and modeling will be adjusted through an activity.
Toolbar control the display can be accessed from any of the 3 steps:
• Select Tools-> Customize from the main menu.
• Select View Toolbars from the menu min.
• Use the third mouse button in the window Unigraphics, outside
Graphics window.
Views of each toolbar, and every element of each toolbar, the user
adjusted. To turn ON or OFF display the toolbar select
Tools -> Customize or click MB 3 in the toolbar area and select Customize.
Placing a check in the box beside the name of the toolbar will immediately display
toolbar in the area of graphics.

Comments Off

Create an Arc on SOLIDWORKS

We can create an arc by specifying three points (start, end, and midpoint).
To make a three point arc:
1. Click the 3 Point Arc the Sketch toolbar, or click Tools, Sketch Entity, 3 Point Arc.
Arc appeared PropertyManager
PropertyManager controlling sketch Centerpoint Arc Arc, Tangent Arc, or 3 Point Arc.
Parameters
We can determine the appropriate combination of the following parameters to determine the arc / arcs.
If we change one or more parameters, other parameters are automatically updated.
Center X Coordinate: X Coordinate Center
Center Y Coordinate: Center Y Coordinate
Start the X Coordinate: Starting X coordinate dr
Y Coordinate Start: Start mister Y Coordinates
End X Coordinate: Coordinate X End
End Y Coordinate: End Coordinates Y
Radius, Angle.

Comments Off

Use AutoCAD 2012

The first step we must do in order to use AutoCAD 2012 is to install software via CD-ROM. If we are not used to install AutoCAD, you can ask for help from someone familiar with the computer system. For those of you who want to try to install itself, steps should be taken to install AutoCAD 2012 are: A. Run AutoCAD Installation wizard (SETUP.EXE) from the CD or in hard 2. Select to english language (language) used to install and click Install Product 3. On display the Select Product to Install, checklist Autodesk Autocad 2012 and 2012 Material Library and then click Next 4. In the view License Agreement, select I Accept and click Next 5. On display User and Product Information, the contents of the required data and fill in the serial number and product key / keygen, and then click Next. 6. On the Begin Installation, click Install, and when asked whether to use the default configuration / settings, click yes. Because by default, will install AutoCad for personal computers. 7. Wait until the program finished installing AutoCad. 8. Click Finish. AutoCAD has finished installed on your computer. If we use the activation code crack for Autocad way to extract the crack in the CD to the program file where AutoCAD is installed in C: \ Program Files \ Autodesk \ AutoCAD 2012 - English By default, AutoCAD prominent place on the desktop shortcut. We can double click this shortcut To start of AutoCAD or it can start> Programs> Autodesk> AutoCAD 2012> AutoCAD 2012.

Comments Off
Powered by Blogger.